Производство железобетонных смотровых колодцев и колец: требования precast manhole / ГОСТ 8020

1. The Evolution of Precast Concrete Manhole Systems

In modern underground utility engineering, brick-built inspection wells have been universally banned across major jurisdictions due to chronic mortar joint leakage, root penetration, and high labor costs. Precast reinforced concrete manholes have become mandatory for municipal sanitary sewer, stormwater, electrical, and telecommunication networks.

A complete precast manhole structure must resist heavy highway design specifications H-20/HS-20 traffic surface loads, high lateral earth pressures, and corrosive biogenic sulfuric acid attacks while maintaining 100% vacuum watertightness.

2. The 4 Core Manhole Modular Components

HLY supplies complete modular steel tooling sets designed to produce all four critical manhole components:

• Monolithic Base Section (井底座 / Base Invert): Houses the bottom slab and precision-sloped flow channels (benching) with cast-in flexible pipe-to-manhole rubber boots (standard engineering C923).
• Riser Sections (井室 / Barrel Risers): Straight cylindrical sections available in standard heights of 250 mm, 500 mm, 750 mm, 1000 mm, and 1500 mm, featuring tongue-and-groove joints.
• Eccentric & Concentric Cones (井筒偏心/同心收口锥体): Reduces the internal chamber diameter (e.g. from DN1000/DN1200 mm down to DN700 mm) to receive standard cast iron manhole frame and cover sets.
• Flat Slab Transition Tops (减缩平板盖板): Heavy reinforced concrete slabs used in shallow burials where conical reducers cannot fit within depth constraints.

3. precast manhole & manhole specification Technical Specifications

precast manhole ('Standard Specification for Circular Precast Reinforced Concrete Manhole Sections') establishes rigid dimensional and strength thresholds:

4. Monolithic Base Casting & Integrated Flow Inverts

The base section represents the highest engineering complexity. Two-piece construction (pouring a flat slab and grouting a riser ring on top) creates a vulnerable cold joint prone to severe groundwater infiltration.

HLY monolithic base molds utilize an inverted casting technique with customizable modular core inserts. This allows the factory to cast the bottom slab, riser wall, and curved hydraulic flow channels (inverts) in a single monolithic pour without secondary masonry.

5. Joint Profiles & Resilient Gasket Watertightness

Joint sealing is the primary factor determining sewer system longevity. HLY manhole molds produce precision confined O-ring or profile gasket grooves (standard engineering C443):

• Pre-lubricated integrated rubber gaskets (滑动橡胶密封圈) eliminate field contractor errors.

• Butyl rubber flexible mastic rope (mastic sealing specification) provides dual-layer insurance against hydrostatic head.

6. Production Methods: Wet Cast vs. Dry-Cast Vibration

Depending on client output requirements, HLY molds support two production paradigms:

1. Wet-Cast Self-Consolidating Concrete (SCC): Superior surface aesthetics, ideal for complex multi-pipe connection bases and custom junction chambers.

2. Dry-Cast High-Frequency Core Vibration: High-output vertical casting machine producing a finished riser or cone section every 4 to 6 minutes with immediate mold stripping.

7. Frequently Asked Engineering Questions